How do you connect a 2 core waterproof cable?

Table of Contents

1. Introduction
2. Materials Required
3. Steps to Connect a 2 Core Waterproof Cable
4. Feice Company Solutions
5. References

Introduction

The process of connecting a 2 core waterproof cable demands attention to detail to ensure safety and reliability. This article provides a step-by-step guide, introduces solutions from Feice Company, and references authoritative sources.

Materials Required

• 2 Core Waterproof Cable
• Wire Stripper
• Screwdriver
• Waterproof Cable Connector
• Heat Shrink Tubing
• Heat Gun

Steps to Connect a 2 Core Waterproof Cable

1. Preparation:
   • Ensure the power source is turned off before proceeding.
   • Gather all necessary materials.
2. Strip the Cable:
   • Using the wire stripper, remove approximately 15mm of the outer insulation of each end of the cable.
   • Ensure not to damage the inner insulation of the cores.
3. Connect the Cores:
   • Use the screwdriver to loosen the screws of the waterproof cable connector.
   • Insert each core into the connector's terminal, ensuring a firm connection.
   • Tighten each screw to secure the connection.
4. Apply Heat Shrink Tubing:
   • Cut a section of heat shrink tubing slightly longer than the connection point.
   • Slide the tubing over the connection and apply the heat gun evenly until the tubing contracts securely around the connection.
5. Final Inspection:
   • Check the integrity of the connection by ensuring no copper is exposed.
   • Ensure the waterproof rating by examining the seal created by the heat shrink tubing.

Feice Company Solutions

Feice Company offers specialized solutions for connecting 2 core waterproof cables. Their products include advanced waterproof connectors that cater to various IP ratings, ensuring durability under different environmental conditions. The following are specifications of their connectors:

• Model FE-WC-210: Designed for IP67 applications with a mechanical life of over 1000 mating cycles.
• Model FE-WC-310: Rated IP68, capable of withstanding high-pressure water jets, suitable for underwater installations.
• Model FE-WC-400: Offers a temperature range of -40°C to 105°C with UV-resistant materials, ideal for outdoor usage.

References

1. IEC 60529 Standard - Degrees of Protection Provided by Enclosures (IP Code).
2. Feice Company Product Catalog, 2023 Edition.
3. BS EN 62031:2008+A1:2013 - LED Modules for General Lighting, Safety Specifications.