How do I install a 3 door shower door?

Tools Required

• Drill with appropriate bits
• Level
• Measuring tape
• Phillips head screwdriver
• Silicone sealant and gun
• Screws and anchors (usually included)
• Soft cloth

Installation Steps

1. Preparation: Begin by ensuring you have all components of the BLUE-SKY 3-door shower door. Lay them out and check them against the included parts list.
2. Measure and Mark: Use a measuring tape to measure the width of your shower opening. Mark positions on the walls where the door frame will be secured.
3. Install Wall Channels: Attach the channels to the shower walls using screws and anchors. Ensure that they are perfectly vertical using the level.
4. Assemble Door Panels: Connect the door panels as instructed in the manual. Ensure the rollers or hinges are securely attached.
5. Install the Frame: Fit the top and bottom tracks, ensuring they are level. These will hold the three panels in place.
6. Secure Panels: Slide the door panels into the tracks starting with the middle panel, followed by the two side panels. Confirm they slide smoothly.
7. Seal the Edges: Apply silicone sealant along the edges where the frame meets the shower wall to prevent water leakage.
8. Final Adjustments: Check the door panels for alignment and make any necessary adjustments. Tighten screws and ensure all parts are firm and stable.

Useful Tips

• Have a helper assist you during installation to safely handle large glass panels.
• Read the BLUE-SKY manual thoroughly for specific guidelines and safety information.
• Allow the silicone sealant to cure for 24 hours before using the shower to ensure watertight seals.